Dlc9g platform cable usb driver11/12/2022 ![]() The legacy DLC9 cable model does not enumerate on hubs with the 100 mA restriction. Some older root hubs or external bus-powered hubs might restrict devices to 100 mA. The legacy DLC9 cable model requires mA to operate in USB 2.0 Hi-Speed mode mA to operate in USB 2.0/1.1 full-speed mode. Note: The DLC9G and legacy DLC9LP cable models draw less However, performance is not optimal when attached to USB 1.1 hubs (refer to "Hot Plug and Play," page 5 for an explanation of USB enumeration). Platform Cable USB hubs, or external self-powered hubs), including legacy USB 1.1 hubs. All other trademarks are the property of their respective owners. XILINX, the Xilinx logo, Virtex, Spartan, ISE and other designated brands included herein are trademarks of Xilinx in the United States and other countries. Platform Cable USB supports indirect (via an FPGA IEEE 1149.1 port) programming of select flash memories including Device configuration and programming operations using Platform Cable USB are supported by iMPACT download software using Boundary-Scan (IEEE 1149.1 / IEEE 1532), slave-serial mode, or serial peripheral interface (SPI). Actual transfer rates can vary if bandwidth of the hub is being shared with other USB peripheral devices. A sustained slaveserial FPGA configuration transfer rate of 24 Mb/s is possible in a Hi-Speed USB environment. It derives all operating power from the hub port controller. Platform Cable USB attaches to the USB port on a desktop or laptop PC with an off-the-shelf Hi-Speed USB A-B cable. Note: The next generation, Platform Cable USB II, is now available. An optional adapter that allows attachment of a flying lead set is included for backward compatibility with target systems that do not use the ribbon cable connector. Platform Cable USB attaches to target systems using a 14-conductor ribbon cable designed for high-bandwidth data transfers. Target clock speeds are selectable from 750 kHz to 24 MHz. ![]() ![]() ![]() Platform Cable USB (Figure is a high-performance download cable attaching to user hardware for the purpose of programming or configuring any of the following Xilinx devices: ISP Configuration PROMs CPLDs FPGAs the Platform Flash XL configuration and storage device. ![]() Programs serial peripheral interface (SPI) flash PROMs Platform Cable USB has these features: Supported on Windows and Red Hat Enterprise Linux Automatically senses and adapts to target I/O voltage Interfaces to devices operating at 5V (TTL), 3.3V (LVCMOS), 2.5V, 1.8V, and 1.5V LED Status Indicator CE, USB-IF, and FCC compliant Intended for development not recommended for production programming Pb-free (RoHS-compliant) Configures all Xilinx® devicesĪll Virtex® FPGA families All Spartan® FPGA families / XC9500XV CPLDs CoolRunnerTM XPLA3 / CoolRunner-II CPLDs XC18V00 ISP PROMs Platform Flash XCF00S/XCF00P/XL PROMs XC4000 series FPGAs ![]()
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |